You’re out for a nice drive along the beach, and you get the urge to listen to some tunes. In order to appreciate your music to the maximum, to hear the brain splitting, window rattling power of a strong car stereo system, you will need a good subwoofer, if you don’t have one already.
Whether you are driving and listening to your OEM factory stereo system, or a high performance aftermarket car stereo system, in order to headbang, you need an equally high performance subwoofer. We understand this and have compiled a concise list of 5 of the Best 8 Inch Subwoofers on the market today, plus a few hints here and there to get you started.
Top Rated Car Subwoofers
|CT Sounds||Meso 2.0 8" D4|
|Skar Audio||VVX-8v3 D4|
5 Best 8 Inch Subwoofers Reviewed
The Rockford Fosgate P3SD2-8 8″ Dual 2-Ohm Punch Series Shallow Mount Car Subwoofer is a very powerful subwoofer designed to really pack a punch with it’s RMS rating of 150 watts. This subwoofer conforms to the CEA-2031 industry standards, which means that you can use your woofer at the 150 watts RMS continuously and the bass will remain consistent.
This rating means that you are guaranteed to rattle the windows as you listen to your favorite genre of music with it’s anodized aluminum cone, high temperature 2 inch voice coil and PVC magnet cover. This is designed without an enclosure, so if you are going to purchase one or make one the cutout diameter is 7.13 inches and the depth is 2.66 inches. The designers at Fosgate found that by stitching the tinsel leads to the fatigue resistant poly cotton spider, your off chance of your subwoofer shorting out was reduced, which improves the overall performance of the subwoofer.
VAST, or Vertical Attach Surround Technique functions to increase the surface area of the cone, and makes the subwoofer 25 percent performance wise, improving the nominal efficiency and max output. Additional features include flex-fit mounting pattern, proprietary spider venting and cooling technique, StampCast basket, 16 gauge compound bend frame geometry, high modulus Kevlar motor cover, and Klippel verified.
- 2 inch voice coil.
- Anodized aluminum cone.
- 150 watts RMS.
- Fatigue resistant poly cotton spider.
- VAST, or Vertical Attach Surround Technique.
Summary- The Rockford Fosgate P3SD2-8 8 inch Dual 2-Ohm Punch Series Shallow Mount Car Subwoofer is our first choice due to the excellent bass sound, anodized aluminum cone, 2 inch voice coil formers which dissipate heat to prevent burnout, and PVC magnet cover.
A member of Fosgates ‘Punch’ series, it is built to give continuous, even and solid sound with the dual tear and poly cotton spider. It has 150 watts RMS powerhandling, VAST (Vertical Attach Surround Technique), Kevlar motor cover, and Klippel verified.
For big, bad bass, look no further than the Meso 8 inch woofer. The CT Sounds Meso 8 Inch dual 4 Ohm resistive voice coil Subwoofer is one powerful subwoofer, eating up 800 watts RMS for a thundering bass sound for its size, and a massive peak performance of 1600 watts.
The overall look of the Meso is clean, and the trim is stylish, and if you use the correct gauge wiring during install, you’ll find the audio quality hard hitting and will definitely knock out the competition in terms of clean, loud bass with virtually no distortion. The voice coil is 2.5 inches in diameter and is what is behind the power this subwoofer has to offer, as well as a 160 ounce Y35 graded triple stacked ferrite magnet, composite foam, double stitched treated paper cone, and tough arm styled basket frame.
All of these elements work together seamlessly to fit this massive power into such a compact subwoofer, without any concern of the woofer burning out or becoming damaged. The Meso does not come with its own enclosure, so you would either purchase an enclosure separately or construct one with a 7.3 inch cutout diameter, 8.7 inch overall diameter, and a mounting depth of 6.6 inches.
- Powerful 800 watt RMS subwoofer.
- 4 Ohm dual voice coil.
- Big sound with virtually no distortion.
- 160 ounce, Y35 ferrite magnet.
- 2.5 inch diameter voice coil.
Summary- The main reason you’d want to own the CT Sounds Meso 8 Inch Car Subwoofer is for its tremendously loud, solid bass, which rattles windows and thumps your chest, all with little or no distortion. It’s constructed of elements which respect this and are designed not to burn out or be damaged by continuous use at 800 watts RMS.
Features include 2.5 inch dual 4 Ohm resistive voice coil, peak max of 1600 watts of power, stylish and durable. 160 ounce Y35 graded triple stacked ferrite magnet, composite foram, double stitched, treated apaer cone. All in all, one of the loudest woofers on the market.
The Skar Audio VVX-8v3 D4 Subwoofer is one subwoofer which can punch a hole in the grille of many of its competitors with its performance and reliability, and 400 watts RMS power handling. The basket has been custom tooled, the driver has been designed with an advanced cooling system with vents in the coil former to prevent burnout, and the monster Y30 triple stack ferrite magnet, chrome backplate finish.
It has also dual 4 Ohm high temperature copper voice coil configuration, competition grade pressed paper cone, and high roll foam surround mean you will not only get excellent booming bass with low distortion but reliability as well.
The trim is a sporty chrome finish, the frequency response is 55 to 500 Hz, and sensitivity is 83.9 dB. A progressive suspension means that you can boom your bass at 400 watts RMS continuously without damaging the speaker due to the triple joint re-enforcement ring.
This subwoofer does not come with an enclosure, so be mindful that it will be either sold separately or you will build one with outer diameter 7.8 inches, cut out diameter 7.2 inches and a mounting depth of 5.9 inches.
- Powerful 400 watts RMS.
- Y30 triple stack ferrite magnet.
- Excellent bass with little distortion.
- Advanced cooling system.
- High temperature, 2 inch copper voice coil.
Summary- Do you like the idea of high performance, affordable, competition grade subwoofer for your car, because if you are, look no further than the Skar Audio VVX-8v3 D4 Subwoofer designed with an advanced cooling system, 400 watts RMS and a high temperature, 2 inch copper voice coil.
You’ll love the stylish chrome finish, as well as the progressive suspension, custom tooled basket and Y30 triple stack ferrite magnet. This is a powerful woofer that requires little space, and should fit in your trunk or luggage area quite nicely.
The Rockford Fosgate PS-8 8″ is a subwoofer that capable of giving a nice sound at 150 watts RMS. This has a shallow mount single 8 inch punch powered loaded enclosure that actually comes with an integrated class D amplifier, so that means you do not have to go out and purchase a separate amplifier, and you also get a remote bass level control.
This woofer is CEA-2006 compliant, CEA-2031 compliant and a Klippel verified driver and the kit includes all the wires you’ll need including power, ground and turn on wires. The fact that the enclosure is made from cast aluminum to protect your woofer from bumps and bruises, means that it is absolutely perfect for those of you who do a lot of off road driving on rough terrain and need a suitably durable subwoofer.
Easy to install, as the kit includes the mounting hardware. Other features include supporting of hi-level and low level inputs, short circuit, thermal and reverse polarity protection and a closed loop design which makes sure you receive optimum performance with your woofer, amp, and enclosure. It has a nice, variable 12 dB/octave Butterworth low pass crossover to the tune of 50 to 120 Hz, a built in bass boost equalizer, and frequency response is 25 to 150 Hz.
- Powered Loaded Enclosure, cast aluminum.
- RMS power handling: 150 Watt.
- Closed-loop design.
- Integrated Class D Amplifier.
- Adjustable 12 decibel/Octave low pass crossover.
Summary- The Rockford Fosgate PS-8 8″ 150 watt RMS subwoofer is a completely enclosed system and comes with everything you need for easy installation. The tough, cast aluminum enclosure means you can install this woofer in any vehicle including off road and recreational vehicles, without losing a beat to the bumps.
This has a Klippel verified driver, is CEA-2006 and CEA-2031 compliant and comes with an integrated class D amplifier, which may be the reason most of you want to get it. It also comes with short circuit, thermal and reverses polarity protections to ensure mechanical stability.
The Polk Audio db840 8-Inch Single Voice Coil (SVC) Subwoofer is an affordable, stylish and dependable subwoofer which provides a solid, deep bass without distortion due to the cone, vented voice coil alignment and suspension, with 180 watts RMS, and Frequency response: 30-200 Hz.
The stiff, durable dished cone is made of durable polypropylene with a Santoprene surround for stability. The Santoprene surround has been specifically designed to withstand both high and low-temperature extremes without losing its characteristic stiffness, which translates to you getting dependable mechanical stability and an even sound.
The previously mentioned voice coil alignment, suspension, and motor owe their superb performance to being optimized by the Klippel laser analyzer. The nice thing about the Polk subwoofer is that it works equally well in OEM standard stock stereo systems as it does in powerful aftermarket stereo systems. Other features include, triple vented, 4 layer Kapton voice coil former, and the NOMEX spider is flame resistant which means that it maintains thermal stability without risk of burning out.
This subwoofer has been marine certified which means it is tough enough to handle being installed on boats, recreational vehicles, off road vehicles, and are the only speakers used in Correct Crafts award winning Nautiques and wakeboarding boats.
- Dished polypropylene cone.
- Marine Certified.
- Santoprene surround withstands temperature extremes.
- Flame resistant NOMEX spider.
- Triple vented, 4-layer Kapton voice coil former.
- Optimized using a state-of-the-art Klippel laser analyzer.
Summary- If you are looking for a reliable, durable subwoofer that can deliver 180 watts of continuous performance, then the Polk Audio db840 8-Inch Single Voice Coil Subwoofer is for you. Not only do you get affordable, gut-rumbling bass, but it has been designed to withstand the elements, and is marine certified so if you have a boat, RV, or off road vehicle you do not have to be concerned about water, slush or mud.
Features include 4 layer Kapton voice coil former, components, flame resistent NOMEX spider, and virtually no distortion. Stiff, dished polypropylene cone, santoprene surround, and optimized using state-of-the-art Klippel lazer analyzer.
How to set up a subwoofer in a car?
You have just purchased your subwoofer and are really excited to go on a nice, long drive listening to your favorite tracks. Installation of a subwoofer is not hard at all, but if you feel that you are not quite ready for this, feel free to take it to a certified mechanic and have them do it for you.
Below we have a guideline set up for you. Remember, this is only a guideline and you are totally responsible to follow the instructions that came with your subwoofer, as each product has its own design, and cannot be lumped under one set of instructions.
NOTE: Please disconnect your car’s battery before installing your subwoofer, or doing any electrical work on your vehicle.
Step 1: First things first. That means making sure you are parked on a level area, have plenty of light, disconnect your car’s battery and apply your parking brake. Next, get out your personal subwoofers instruction manual and collect all of the tools you will be using.
Step 2: Now, take some consideration of placement. Most people put the subwoofer in their trunk. Measure your subwoofer and take that measurement with you to the areas you are considering placement. Choose the best area, one that will give you a few inches breathing room around the speaker.
Step 3: Some subwoofers have enclosures, others do not. If you have a model that does not have an enclosure, just the woofer, you can either purchase an enclosure or make one for yourself. See what your instruction manual recommends, and if you choose to make your own enclosure, or ‘box’, make sure that you use only materials that are designed to optimize sounds, such as MDF or fiberglass.
Step 4: Once the box is completed, it is time to think about running the wires. Remember to keep the wires away from hot areas, areas with moving part, do not crimp them and use zip ties to keep it all neat and in place. Some subwoofer kits come complete with wiring kits, but if yours did not you need to get one before you go to the next step.
Step 5: Get your manual out, and read this part very carefully, as you will be connecting your subwoofer to your cars stereo system. Following manual instructions, run the wiring to the front of the car and connect the subwoofer to your cars stereo. After making sure that all wires are hooked to the proper connectors, secure your subwoofer and stereo, connect your battery and flip on the ignition to test your subwoofer.
The Final Thought (Conclusion)
When it is all said and done, you’ll find that the addition of the subwoofer is one of the easiest upgrades you’ll ever do to your vehicle. Not only is it easy and affordable, it improves the quality of the ride for both you and your passengers with high quality audio.
As always, we hope that you found this subwoofer review of the Best 8 Inch Subwoofer not only useful and helpful, but informative as well, and walked away with just a bit more knowledge about subwoofers than you had before. Be sure to come back and pay us a visit soon, so see more fantastic, high performance products for your cars and trucks.