Having the perfectly balanced sound system for your car or truck is a must have for most drivers. While your vehicle comes off the factory line with a rather nice standard, stock stereo system, for all intents and purposes, it offers only average performance.
What you need to spice up your sound is to purchase a fabulous aftermarket speaker system which will ensure that your ride is pleasantly filled with the depth and richness of high quality bass, the crisp, crystal clear highs, and nicely defined midrange vocals.
We realize that choosing the perfect speakers for your vehicle can be a little tricky, we’ve compiled a brief article along with a selection of some of the best speakers for a car on the market today, for your convenience.
The best car speakers in this year
|CT Sounds||Meso 6.5"||6.5"|
5 Best Speakers For Car Reviewed
The Rockford Fosgate R165X3 Prime 6.5-Inch Full-Range 3-Way CEA-2031 compliant Coaxial Speakers are a top seller on the market due to their superb audio performance and low price point. Each one of these speakers has a gorgeous, deep and rich bass that is supplied by using a stiff polypropylene woofer cone with a rubber surround.
Speakers handle their high frequencies by way of a 1/2 inch silk dome tweeter and a 2-1/8 inch Piezo super tweeter and come with a high temperature voice coil design. The Fosgates built-in, integrated concealed crossover network handily blends your bass and treble so you can get incredibly clear and crisp midrange, and this, of course, is where you’ll find your vocals, so no more smudged lyrics.
Your power handling range is 2 to 45 watts RMS, with 90 watts peak power output, with a recommended power range of 10 to 50 watts RMS per channel, sensitivity is at 91 decibels and top-mount depth is 2-3/16 inches. Rockford Fosgate has ensured that these speakers meet up with the standards of the Klippel certification, which guarantees you will get top-notch audio performance.
- Power Handling: Peak is 90 watts each; RMS is 45 watts each.
- Polypropylene cone material.
- 2-1/8″ Silk Dome Piezo mid-range tweeter cone.
- 1/2″ Silk Dome Piezo tweeter design.
- High-temperature voice coil design.
- Klippel certification to deliver best possible speakers.
Summary- The Rockford Fosgate R165X3 Prime 6.5-Inch Full-Range 3-Way Coaxial Speakers are CEA-2031 compliant speakers. They have a high-temperature voice coil design, 2-1/8 inch silk dome Piezo mid-range tweeter cone, 1/2 inch silk dome Piezo tweeter design, woofer with a stiff polypropylene cone material, power handling of 90 watts RMS (45 watts each).
It Peaks of 180 watts per pair (90 watts each), with a recommended power range of 10 to 50 watts per RMS channel. Klippel certification for excellence in an audio quality round out the many reasons why the Fosgate is a pretty good speaker for your vehicle.
The Alpine SPS-610C 6-1/2″ Component 2-Way Type-S Speaker System offers you and your passengers awesome sounding car speaker performance at an affordable price. This speaker is perfect for when you wish to upgrade your OEM factory grade speakers and will blend into your car’s interior seamlessly, as this Type-S speaker line comes with various size options which allow it to be easily installed in most vehicles.
The Alpine has an HD polymer frame which means it is constructed with materials that make it resonance-free, damped and distortion free sound. The powerful woofer has a tuned poly/mica cone structure with a rubber surround which drives the fast energy transfer, and the high excursion suspension means you will have a progressive Aramid fiber spider, optimized to provide a nice, thick and rich bass sound.
A rigid, strong, and large, 30mm diameter voice coil of copper square wire, means you get optimum power handling for the price, along with crisp, clear sound, and a magnet composed of high grade strontium. Your treble or high frequency sounds are handled by a Type-S tweeter with a 1-inch wide soft silk dome diaphragm with stiff aluminum, a copper cap reduces distortion so you can hear those vocals clearly, and a high grade, in-line crossover network that pulls it all together.
These speakers have a CEA-2031 power rating of 80 watts, a power handling capacity RMS 80 watts, and a power handling peak capacity of 240 watts, the frequency response is 70 Hz to 22 kHz, impedance is 4 Ohms and sensitivity is 88 decibels.
- HD Polymer frame.
- Tuned Poly/Mica cone.
- High excursion suspension: spider.
- FEA optimized motor structure.
- High power handling.
Summary- The Alpine SPS-610C 6-1/2″ Component 2-Way Type-S Speaker System gives excellent performance at an affordable price. Designed to replace your OEM factory grade speakers, various size options for different vehicle models, HD polymer frame, woofer with a poly/mica cone structure, Aramid fiber spider, 30mm diameter voice coil, strontium magnet.
Type-S tweeter has a 1-inch soft silk dome diaphragm, stiff aluminum, copper cap, built in crossover network. The power rating of 80 watts, power handling RMS 80 watts, power handling peak of 240 watts, and sensitivity is 88 decibels.
The Jeep Wrangler JK Kicker Speaker Upgrade in this description is for model number, #77KICK10 and is compatible with 2007 to 2019 Jeep Wrangler, 2 door/4 door vehicles only, and functions as a dashboard or sound bar speaker upgrade. Compatibility guide for the 77KICK10 upgrade is listed as: 2005-2010 Grand Cherokee; 2007-2019 Wrangler; 2006-2010 Commander; and 2008-2012 Liberty models.
This upgrade will fit into the dashboard and sound bar for the Jeep Wrangler, and the rear door for the Commander, Grand Cherokee, and Liberty models, so please check your particular Jeep model/make/year before you purchase this or any other upgrade from Kicker to ensure you have the correct model.
Kicker has designed this product to work specifically with your MOPAR with easy ‘plug and play’ install which means that the speakers simply plug into your existing wiring, so no need to cut and splice wires. Power handling for this upgrade is 75 watts RMS, 150 watt peak. This premium speaker upgrade is guaranteed to give you a loud, pumping bass with the ability to handle high frequency treble, and clear, audible midrange vocals.
- Easy to install, plug and play OEM factory upgrades.
- 75 Watt RMS; 150 Watt peak power handling capability.
- Excellent sound quality.
- Made specifically for MOPAR Jeep vehicles.
Summary- The JEEP upgrade, model number 77KICK10 is an affordable simple upgrade, made for specific Jeep models and makes only. You get two 6.5 inch speakers, power handling is 75 watt RMS and 150 peak RMS.
As stated, these speakers are easy to install, and will mount in your Jeeps instrument panel or doors. Simple yet powerful, this upgrade for your dash or soundbar system is much more powerful than it looks, and customers rave about the improved, enhanced sound quality.
The CT Sounds Meso 6.5 Inch 2 Way Silk Dome Full Range Coax Coaxial Speakers are among the best speaker for cars available. The speakers have a PC+NOMEX spider with a 6mm top plate and 5mm back plate, the voice coil is 1.4 inches in diameter, with each speaker having a Y30 graded ferrite magnet weighing 21 ounces, and a Nitrile Butadiene Rubber (NBR) surround.
Both speakers have a 25mm silk dome tweeter which is covered with a silver chrome plated face grille while being attached to the crossover circuit using copper clad aluminum wiring. The woofer power handling is 60 watts RMS per speaker, and 120 Watts peak for speaker, impedance is 4 Ohms, the output is 88 decibels, the resonant frequency is 75Hz with a frequency response of 45Hz to 10kHz. The tweeter has an impedance of 4 Ohms, the output of 92 decibels, frequency response of 800 Hz to 20k Hz. Overall sound quality is excellent with clear treble, powerful bass, and a defined midrange.
- Glass fiber cone, NBR surround.
- 25mm silk dome tweeter.
- PC+NOMEX spider.
- 1.4 inch diameter voice coil.
- Power handling of 60 watts RMS and 120 watts peak per speaker.
Summary- The CT Sounds Meso 6.5 Inch 2 Way Silk Dome Full Range Coax Coaxial Speakers have excellent sound quality due to their 1.4 inch voice coil, Y30 graded ferrite magnet, Nitrile Butadiene Rubber (NBR) surround, 25mm silk dome tweeter with its silver chrome plated face grille.
The woofer has 60 watts RMS per speaker, and 120 watts peak per speaker, impedance is 4 Ohms, the output is 88 decibels, and the frequency response is 45 Hz to 10kHz. The tweeter has an impedance of 4 Ohms, and an output of 92 decibels, the frequency response of 800 Hz to 20k Hz.
The JBL GTO638 6.5-Inch 3-Way Speakers will give you a nice, full round and rich sound that JBL is famous for. You get the tough bass audio of a Plus One woofer cone and your treble is driven by JBL’s own My-Ti super tweeter has a proprietary Mylar-titanium blend alloy gives it its excellent power handling ability to handle high frequencies and blend the treble nicely with the bass of the Plus One woofer.
The workmanship JBL has placed in its home audio equipment is present in the GTO638 3-Way Speakers, this means that you will not be dealing with run of the mill audio stereo sound, but audio gives you home theater quality sound.
Besides the Plus One woofer cone and super tweeter, your audio is enhanced with the use of a built-in crossover network, which has advanced high pass and low pass filters which creates that nice movement between tweeter and woofer.
As a result, you get a solid midrange so the vocals you hear will be true to life. It is designed with a large voice coil to provide you with the clear as crystal sound you crave. JBL’s patented UniPivot tweeter pod gives you complete control.
It has true 4-ohm performance, nominal impedance is 2 Ohms, power handling RMS is 60 watts, power handling peak is 180 watts, the frequency response is 50 Hz to 21 kHz, and sensitivity is 92 decibels. Installation is simple with the Intermount III system, which means you can install this into any factory-built audio location from 6 to 6-3/4 inch opening.
- Patented Plus One woofer cone.
- Home theater-quality audio.
- Realistic audio from built-in crossover network.
- Patented Intermount III mounting system.
- Can be driven by any head unit.
- True 4-ohm performance.
Summary- The JBL GTO638 6.5-Inch 3-Way Speakers (Pair) Facts: Nominal Impedance is 2 Ohms, Power handling RMS is 60 watts, Power handling peak is 180 watts. Frequency response is 50 Hz to 21 kHz, sensitivity is 92 decibels.
Patented Plus One woofer cone, My-Ti super tweeter, home theater quality audio. Patented UniPivot tweeter pod, Intermount III system, large voice coil, home theater quality audio, true 4 OHM performance, and high-quality built-in crossover network. Of the 5 car speakers on our list today, this is the top choice due to its fantastic, patented features, excellent sound quality and affordability.
How to choose speakers for car audio?
When you purchase your new car, it will come with a capable Original Equipment Manufacturer (OEM) factory stereo system. For some individuals, that is all they require. However, most people look to upgrade their OEM factory stereo system as soon as possible, with high-quality aftermarket speakers, in order to obtain much better audio quality. In order to assist you in your search, we have given you a basic guide to get you started.
1. Component vs Full Range Speakers and Price- If you are looking for a rich, textured sound then component speakers are right up your alley. Unfortunately, component speakers will cost you more than full range speakers as they are built with higher quality materials, come with woofers, tweeters, and sometimes external crossovers.
The full range speaker is simple and less expensive, slightly lower sound quality, has no components and is easy to install. Another factor that can affect the price of your speaker are any installation fees, so ask the salesperson beforehand, especially if you are intent on installing the speakers yourself.
2. Sensitivity- Sensitivity tells you how much power the speaker needs for volume, or how loud it will be at a certain power input. High sensitivity speakers mean you need to use less power, and low sensitivity speakers will need more power. Of course, you want a speaker with a high sensitivity level. Sensitivity is measured in dB or decibels and will look like this in the specs: 90 dB.
3. Power Handling- When you are looking at the specifications, you will see ‘RMS’ and ‘Watts’. These terms refer to how much power the speaker has after being hooked up. The specs will usually have something like 50 watts RMS, which tells you how much power your speaker can handle performing continuously, without burning out. However, ‘Peak Power handling in watts’ refers to the total peak power your speaker has, but be warned as you will burn your speaker out if you use it continuously at this level.
4. Materials- The materials used in your speaker make all the difference in sound quality, enabling you to hear defined and detailed audio you never heard from your factory stock speakers. Try to look for woofer cones that are described in the specifications as somewhat rigid and light, and composed of such materials as polypropylene and mica with a rubber surround.
For tweeters, you want softer material such as silks, and other textile blends, if you like easy sounds, or metal, graphite or ceramic materials if you like your high frequency, sounds sharp, bright and crisp.
5. Size- It’s time to go for your trusty vehicle manual to check on the specifications so you get the right size speaker for your car or truck. Remember, you are looking to purchase speakers that will slip right into the existing speaker openings.
If you are getting component speakers, then you will be looking at woofers and tweeters and possibly an external crossover to place in your vehicle, so make sure that you have room for these components before you buy.
How to install speakers in a car?
You’ve just purchased your cars speakers and are eager to take a nice evening drive, and pump up the volume. But first, you have to install them. If you are not mechanically inclined, we suggest that you see if your place of purchase or local auto shop will install your speakers for you.
However, if you wish to do it yourself we have provided basic guidelines for installation. Remember, that each speaker system is different, and you alone are responsible for reading the installation guide that came with the speakers, in no way is this a replacement for the manufacturer’s instructions which came with the speakers.
NOTE: Please disconnect your cars battery before you proceed to install your new aftermarket speakers.
Step 1: Park your car on a level surface, place the emergency brake on, and disconnect the cars battery. Assemble the tools as per your instruction manual. Tools required will vary but usually include the following: Flat and Philips head screwdrivers, wire cutter, and an electric drill. It is a good idea to grab a small bowl or container from the kitchen so you have a receptacle to place loose screws into so they do not get lost.
Step 2: Once you have your car parked, battery disconnected and tools handy, it is time to remove your vehicles speaker grilles or panels using a flat head screwdriver. For most vehicles, the speakers are located within easy reach, but if you cannot locate your vehicles factory stock speakers, check the manual for their location. Next, remove your cars factory installed speaker by carefully disconnecting any wires, remove any screws and place them in a bowl.
Step 3: Now it’s time to hook your new aftermarket speakers to your cars electrical system. Most of the time, you’ll take the wiring harness you carefully disconnected from your old speakers and simply connect it to your new speakers. Again, check with the instruction manual that came with your aftermarket speakers to assist in their correct placement.
Step 4: Take a good look at the wiring, to make sure that it is hooked up correctly. Once you are sure your speaker is connected properly you’ll want to replace the grilles and panels. However, don’t replace the panels or grilles just yet, as you first need to test the speakers in order to make sure you did the wiring right. So, start by reconnecting your vehicle’s battery, turn on your ignition, and test your speakers.
Step 5: This next step depends on what type of speakers you purchased: Full range speakers or component speakers. If you purchased component speakers, you have an extra step, which is to connect your components, the woofers, and tweeters. Go back and disconnect your car’s battery, then proceed to install and test your woofers and tweeters.
Step 6: Once you are satisfied with your installation, it is time to finish up. This means checking your speaker’s instruction manual to properly secure the speakers in place. Some speakers use mounting brackets, others adhesives, and for others, you may be required to drill extra holes in order to screw it in securely. Finally, all you have left is to replace the grilles or panels!
The Final Thought (Conclusion)
Going for a nice, relaxing drive with the windows rolled down and the sound pumped up is one of life’s special pleasures. In order to enjoy that nice, relaxing drive to its fullest, you will need the absolute best in high performance speakers. Fortunately, most brands of high quality aftermarket speakers are very affordable, fit into your decor nicely and give you a much needed audio improvement over your factory installed speakers.
It is our hope that after reading our article, you came away with a little more knowledge regarding aftermarket best speakers for cars, and will join us again very soon for another informative article on important and necessary products for your cars or trucks.