By 2019 it will be a law in the states that all vehicles must be equipped with a rearview camera to assist in backing up. This law is in response to the countless number of mishaps that occur when individuals back their vehicles up and run over or into things.
Designed specifically to reduce blind spots, this wireless back up camera with the 4.3-inch dashboard monitor by Yada is an affordable, efficient and wireless way to assist your backing up, and thus give you peace of mind. Our Yada Backup Camera Review will get you familiar with this rearview camera, its features, and ease of installation and use.
You may choose this Yada Digital Wireless Backup Camera for the following Specification:
- No interference digital signal.
- Night vision.
- Wide angle, weatherproof camera.
- When you hit reverse, the image appears.
- Ultra sharp and clear picture with parking assistant.
Monitor of this Yada Backup Camera
While the camera is the most important part of any back up review camera system, having an easily adjustable monitor that is easy to view is just as important. This rear view backup camera by Yada comes with a 4.3 inch TFT, LCD monitor, that gives you a good quality view of what is going on behind you.
The monitor comes with a convenient windshield mount if you choose to go that route and also allows for an additional camera, so you can have two backup cameras as well. Upon looking at the monitor, you will notice that the monitor will have a series of buttons to aid you in getting the best possible view: Down (-), menu, power, parking aid line, and up (+).
Feature of Yada Backup Camera
This easy to install, rear view camera is tough and durable, with a water resistant rating of IP67, which makes it basically weatherproof. The angle is fairly wide at 110 degrees, it has night vision for the ability to see in low lit areas or in complete nightfall.
The operation range for your camera is 30 to 50 feet, based on customer reviews, and the image sensor is of the CMOS type. When cleaning your camera from rain, snow or dirt, simply rinse with plain water and wipe, never use alcohol or any other thinner to clean the camera or your camera will become discolored.
One of the best features of this rear view camera is that it is wireless, and that means that installation is simple and will not involve running wires fro the back of the car to the front. Basically, you’ll just mount the camera on the license plate, connect the wires to the reverse light, take the zip ties that come with the kit to tie the wires up so they don’t dangle.
Remember that wires should not be kinked, or bent in any way. This is necessary so the camera will automatically turn on when you go into reverse. After that, you just need to position and attach your monitor up front using the hardwire power cable and windshield mount or hook and loop straps that come with your kit.
This rear view camera will most certainly do the job it has been conscripted for. Your viewing angles are more than adequate at around 110 degrees, and the clarity of the video image is sufficient, remember, this is a simple rear view camera, so you won’t get high definition quality video here, but the image will be clear.
To increase performance, remember that you may need to adjust your camera or monitor to get the best view possible. The night vision feature performs rather well and helps quite a bit when you are backing up in the face of glaring sun, dusk or night time. The distance lines, parking aid lines, will assist you in gauging how much to back up.
Pros & Cons of Yada Backup Camera
Pros of the Product
- Affordable price
- Decent picture quality and viewing angles
- Simple installation
- Parking assistance lines
- Easy to adjust and place monitor
Cons of the Product
- Not entirely weather proof
How to get the most out of your Yada Rear-View Camera and Monitor
This is easy to install and use the rearview camera, so we’ve included some tips to help you get the most out of your purchase. To begin with, make sure that the video image is just right for you, so make adjustments as to placement to get the best possible view.
Please test the distance lines or parking assistant lines before you use them, this will help you to the better judgment of objects. Never back up by only looking at the monitor, as this is a driving aid.
The Yada is not to be used as a substitute for sensible, common sense driving, so always check behind your vehicle for anything before you get in to drive. Always back up slowly and remember a wide angle lens is being used, so still check over your shoulder to properly gauge distances of objects, your own vision and judgment comes first.
While this camera has a waterproof IP rating of IP67, take care when using a power washer, as the force may be too great for the camera, some owners claim that adding a waterproofing spray sealant around the camera helps.
To get the best out of your camera, make sure that your position and mounting angle of your camera is properly adjusted before each use. Finally, remember to take a look at local laws in case there may be restrictions on rear view cameras in your area.
The Final Words (Summary)
As you can tell from our Yada Backup Camera Review, the Yada BT53328M-1 Digital Wireless Backup Camera is an excellent rear view camera for the price. It comes with a 4.3-inch dash monitor, a windshield mount, and a weatherproof rating of IP67. This rear view camera has night vision and will display live video as soon as you put your car into reverse. The camera has a wide angle of 110 degrees, mounts on your license plate, with distance lines to help you gage objects as you back up.